
Store categories
FREE delivery on orders over £150
(free delivery applies to orders under 30 kilos to zones A & B only,
additional charges over 30 kilos or outside these area zones may apply, please see our terms & conditions page for area chart)
Repair Care Dry Flex SF (Super Finish) single tube
DRY FLEX® SF
Durable fine surface filler for quick, durable spot repairs on timber (paintable after 30 minutes*)
The best of a fine surface filler and an epoxy in 1 product. No primer required. Cures fast, also under colder weather conditions. Easy and fast to apply.
Suitable for:
Fine surface filling and quick, durable spot repairs.
The filling of nail holes, screw holes & cracks.
For repairs of small defects in existing DRY FLEX® repairs.
External and internal applications.
*Typical curing time for a repair applied at 20 º
C. Temperature and humidity may affect curing times.
CHARACTERISTICS
Quick and easy to apply.
Short curing time, even in colder temperatures. Paintable after 1 hour at 5 º
C and after 30 minutes at 20 º
C*.
Can be used with a standard skeleton gun.
Permanent repairs.
Ideal for small repairs.
*This is an indication. Temperature and humidity may affect curing times
Durable fine surface filler for quick, durable spot repairs on timber (paintable after 30 minutes*)
The best of a fine surface filler and an epoxy in 1 product. No primer required. Cures fast, also under colder weather conditions. Easy and fast to apply.
Suitable for:
Fine surface filling and quick, durable spot repairs.
The filling of nail holes, screw holes & cracks.
For repairs of small defects in existing DRY FLEX® repairs.
External and internal applications.
*Typical curing time for a repair applied at 20 º
C. Temperature and humidity may affect curing times.
CHARACTERISTICS
Quick and easy to apply.
Short curing time, even in colder temperatures. Paintable after 1 hour at 5 º C and after 30 minutes at 20 º C*.
Can be used with a standard skeleton gun.
Permanent repairs.
Ideal for small repairs.
*This is an indication. Temperature and humidity may affect curing times