Our Wall & Ceiling Primer & Undercoat is designed for use under Estate® Emulsion, Dead Flat® and Modern Emulsion.
Made with the same ingredients and pigments as our topcoats, this undercoat is the crucial foundation for creating a
rich, even and longer lasting finish

Application Information:
Do not paint in temperatures below 10°C or in excessive heat above 30°C.
Coverage Rate (m2/l per coat): : Up to 12
Drying Time: : Dry in 2 hours.
Typical Recoat Time: : Recoat after 4 hours
Recommended Number of Coats: : 1
*Darker/stronger colours may require additional coats. Please note: The drying and Recoat times provided are based on
applying paint in normal conditions - drying times may be longer in cooler and/or higher humidity environments.
Darker colours may take longer to dry. Allow a minimum of 14 days before applying over solvent based coatings.
Density: : 1.2 - 1.4 g/cc
Wet Film Thickness: : 80 - 120 μm
Application Humidity: : < 80 % RH
Substrate Moisture Content: : Plaster Walls & Ceilings = < 0.5 %