A rust inhibiting primer for all bare ferrous metal surfaces, our Metal Primer & Undercoat is designed to create a smooth foundation
on gates, railings, furniture, radiators and metal downpipes before using Exterior Eggshell, Estate Eggshell, Full Gloss or Dead Flat.
Stir thoroughly before use.

Application Information:
Do not paint in temperatures below 10°C or in excessive heat above 30°C. Avoid painting in direct sunlight. Avoid applying outdoors
if there is a likelihood of rain. For best results apply early in the day, allowing the product time to dry before the evening (when
condensation can occur). This product should be applied in accordance with Annex C of BS 6150: Code of practice for painting of
buildings.
Coverage Rate (m2/l per coat): : Up to 12
Drying Time: : Dry in 2 hours.
Typical Recoat Time: : Recoat after 4 hours
Recommended Number of Coats: : 2*
Please note: The drying and Recoat times provided are based on applying paint in normal conditions - drying times may be longer in
cooler and/or higher humidity environments. Darker colours may take longer to dry. Allow a minimum of 14 days before applying
over solvent based coatings.
Density: : 1.2 - 1.4 g/cc
Wet Film Thickness: : 100 - 140 μm
Application Humidity: : < 80 % RH