CAN'T FIND THE BRAND YOU WANT? CALL US FOR HELP
DELIVERY COSTS ARE APPLIED ONCE ADDRESS IS CONFIRMED, WE SHIP TO THE WHOLE OF THE UK
IF WE CANNOT FIND YOUR ADDRESS OR SHOULD YOU REQUIRE ANY HELP PLEASE CALL US
10% OFF
ALL FARROW AND BALL PAINTS
USE CODE FB1024
AT THE CHECKOUT
OFFER ENDS MAY 31ST 2024
For use on masonry, rendered or plastered surfaces which are porous, chalky or slightly worn. Our Masonry & Plaster Stabilising
Primer will prep the surface for an even and longer lasting finish in our Exterior Masonry, Estate Emulsion or Modern Emulsion.
Available in one colour (dries clear). Not for use on fresh concrete. Not for use as a general primer on masonry surfaces (either bare
or previously painted).
Do not paint in temperatures below 10°C or in excessive heat above 30°C. Avoid painting in direct sunlight. Avoid applying outdoors
if there is a likelihood of rain. For best results apply early in the day, allowing the product time to dry before the evening (when
condensation can occur). This product should be applied in accordance with Annex C of BS 6150: Code of practice for painting of
buildings.
Coverage Rate (m2/l per coat): : Up to 20
Drying Time: : Dry in 2 hours.
Typical Recoat Time: : Recoat after 4 hours
Recommended Number of Coats: : 1
Please note: The drying and Recoat times provided are based on applying paint in normal conditions - drying times may be longer in
cooler and/or higher humidity environments. Darker colours may take longer to dry. Allow a minimum of 14 days before applying
over solvent based coatings.
Density: : 1.2 - 1.4 g/cc
Wet Film Thickness: : 80 - 120 μm
Application Humidity: : < 80 % RH
Substrate Moisture Content:
Plaster Walls & Ceilings = < 0.5 % : Exterior Render = < 0.5 %