Developed by our chemists to offer the perfect combination of breathability and water resistance, this classic matt
creates the most elegant finish for your masonry. With a durable 2% sheen finish and Class 1 water vapour permeability,
Exterior Masonry is resistant to flaking, peeling and colour fade for up to 15 years. Unsuitable for highly alkaline or very
porous surfaces. Does not require a primer

Do not paint in temperatures below 10°C or in excessive heat above 30°C. Avoid painting in direct sunlight. Avoid
applying outdoors if there is a likelihood of rain. For best results apply early in the day, allowing the product time to dry
before the evening (when condensation can occur). This product should be applied in accordance with Annex C of BS
6150: Code of practice for painting of buildings.
Coverage Rate (m2/l per coat): : Up to 8 depending on the surface being painted.
Drying Time: : Dry in 2 hours.
Typical Recoat Time: : Recoat after 5 hours
Curing Time: : Please note that some darker paint colours will take up to 14 days to achieve full hardness, strength and
durability.
Sheen Level: : 2%
Recommended Number of Coats: : 2*
*Darker/stronger colours may require additional coats. Please note: The drying and Recoat times provided are based on
applying paint in normal conditions - drying times may be longer in cooler and/or higher humidity environments.
Darker colours may take longer to dry. Allow a minimum of 14 days before applying over solvent based coatings.
Density: : 1.2 - 1.4 g/cc
Wet Film Thickness: : 80 - 120 μm
Application Humidity: : < 80 % RH
Wet Abrasion Class: : 2
Substrate Moisture Content:
Exterior Render = < 0.5 % : Interior Brick = < 1 %